Skip to content

How to Tell Which Sensor Your E-Bike Has

Checked November 20, 2026

The surest answer is on paper. Your manual or the maker's spec sheet should name the sensor. If it doesn't, you can look for physical clues.

Step by step

Follow these in order. Stop as soon as you have a clear answer.

  1. Read the manual or the maker's spec page for your model. Wikipedia says pedal-assist bikes carry a sensor for pedaling speed, force, or both, so the paperwork should say which kind yours has.1 It also helps to know the model name and year before you start.
  2. Look at the left crank arm and the area around the bottom bracket. On most e-bikes, the cadence ring is plastic with small magnets embedded, mounted on the left crank arm or around the bottom bracket.2 A small sensor sits next to it on the frame.
  3. Notice if the cranks area looks sealed and has no ring. Upway says the torque type usually lives inside the bottom bracket or crank.2 You won't see it as a separate part. A missing magnet ring is a clue, not proof.
  4. Check the wheel. A magnet on a spoke belongs to the speed sensor, which feeds the speed readout.2 It isn't the pedal sensor, so finding it doesn't answer the question.
  5. Ask a dealer or the maker if you still can't tell. Give them the model name and year.
Working out your sensor typeRead the manual or spec sheetLook near the left crank armCheck for a ring of magnetsAsk a dealer if it's unclear
Start with paperwork, then look at the cranks.

Reading the clues

What you see What it suggests
A ring of small magnets at the crank, with a sensor beside it A cadence sensor2
No visible ring, sensor built into the crank area Possibly a torque sensor2
A magnet on a spoke only A speed sensor, not a pedal sensor2

Some bikes carry both a cadence sensor and a torque sensor in their pedal-assist systems.3 So you might find a ring and still have a torque sensor, which is why the paperwork matters more than looks.

Other hints, with limits

Many e-bikes with a mid-drive motor will actually use multiple sensors, per Electrek.4 On a mid-drive bike, look for both kinds.

The same site says that on a bike used mostly with a throttle only, the sensor type is largely irrelevant.4

Another clue is the feel. Electrek says there is usually some lag before the motor kicks in with a cadence sensor, and very minimal lag with a torque sensor.4 Feel can mislead, because tuning varies between bikes. Read up on cadence and torque sensors to see what each tends to do.

Leave the sensor alone

Looking is fine. Opening or pulling apart a bottom bracket isn't, and your manual or a dealer should guide any work on it.

Why the answer is worth knowing

The type tells you what to expect at the start of a ride. A cadence sensor needs the pedals to turn a little before the motor engages.3 A torque sensor responds to how hard you push.

It also tells you which pages to read. Troubleshooting for a cadence sensor, such as a delay at the start, is a different matter from a torque sensor that seems weak. Our lag and run-on page covers the cadence side, and the manual covers the rest.

Reference list

  1. Electric bicycle, Wikipedia
  2. How to Fix an E-Bike Pedal Assist Sensor, Upway
  3. What is the Difference Between Sensor Types on an Electric Bike?, EVELO
  4. Torque sensors vs. cadence sensors for electric bikes, Electrek