Skip to content

What an E-Bike Pedal Sensor Does

Checked November 20, 2026

A pedal sensor is a small part that tells the e-bike's controller you're pedaling. Without that signal, the motor has no way of knowing your feet are moving.1

The job in one line

On a pedal-assist e-bike, the motor is regulated by your pedaling.2 Something has to notice the pedaling first. That something is the sensor. It reads your input and passes it to the controller, which decides how much power the motor adds.3

Wikipedia describes these bikes as having a sensor that detects the pedaling speed, the pedaling force, or both.2 That one sentence already hints at the two main designs. One type notices motion. The other notices effort.

From pedal to motorYou turn the pedalsThe sensor reads the pedalingThe controller gets the signalThe motor adds assist
The sensor sits between your pedaling and the motor.

Two questions a sensor can answer

Makers often put the difference this way: a cadence sensor works out whether you're pedaling, while a torque sensor measures how hard you're pedaling.4

  • Are the pedals turning? A cadence sensor answers this. It cares about movement, and not much else. See how a cadence sensor works.
  • How hard are you pushing? A torque sensor answers this. It reads force, so the motor can follow your effort. See how a torque sensor works.

Both are ways of switching pedal assist on.3 The differences between the two show up in how the bike feels when you set off and when you climb.

A third sensor, for a different job

Some bikes also have a speed sensor. It reads a magnet on the wheel or a spoke and tells the display how fast you're going.1 It isn't the part that notices your pedaling, so it's a separate topic. The page on the speed sensor and wheel magnet covers it.

Upway's guide notes that these are separate components, and that a fault with one doesn't necessarily affect the other.1

Where the sensor doesn't matter

Not every motor waits for a pedal signal. Some e-bikes use a throttle, usually on the handlebar, and the motor is activated by that instead.2 On a bike that's ridden mostly on the throttle alone, the choice between sensor types is largely irrelevant.3

Plenty of bikes have both a throttle and a pedal sensor. In that case the sensor still decides how the assist behaves while you pedal.

Some bikes use more than one

Some e-bike models use a combination of cadence and torque sensors.5 The cadence sensor tells the controller the pedals are moving, and the torque sensor then adjusts the assist more finely.5

Many mid-drive e-bikes use several sensors, while the plain either-or choice mostly applies to hub-motor bikes.3 A hub motor sits in the wheel, and a mid-drive motor sits at the cranks.

Finding out what yours has

Your own manual names the sensors fitted to your model, and the maker's spec sheet often does too. If you aren't sure which type you have, this page on identifying your sensor lists where to look.

The sensor isn't something to adjust on a whim. Alignment, error messages and repairs belong to your manual, and a bike shop can help when the manual stops.

Reference list

  1. How to Fix an E-Bike Pedal Assist Sensor, Upway
  2. Electric bicycle, Wikipedia
  3. Torque sensors vs. cadence sensors for electric bikes, Electrek
  4. What is the Difference Between Sensor Types on an Electric Bike?, EVELO
  5. E-Bike Tech: The Difference Between Cadence Sensors And Torque Sensors, InsideEVs