Skip to content

Torque Sensor vs Cadence Sensor: The Differences

Checked November 20, 2026

Both sensors tell the controller when to switch the motor on. They differ in what they read. One reads motion. The other reads force.

The short version in a table

Cadence sensor Torque sensor
What it reads Whether you're pedaling1 How hard you're pedaling1
Typical parts Magnet ring and a small sensor on the frame2 Often built into the bottom bracket or crank2
How assist behaves Often on or off, set by your assist level3 More force gives more power4
Where the two types differCadence: are the cranks turning?Torque: how hard is the push?Controller picks the assistMotor responds
Same job, different input.

How each one works

A cadence sensor watches the cranks turn. Each magnet that passes the sensor sends a signal.2 The cadence sensor page has the detail.

A torque sensor reads effort. According to one maker, it relies on a strain gauge of some form to gauge pedal force.1 The page on how a torque sensor works covers it.

How they feel

Starting off. With a cadence sensor, Electrek reports usually some lag between pedaling starting and the motor kicking in.3 InsideEVs adds that the design can sometimes result in jerky starts.5 A torque sensor shows very minimal lag between pedaling and the assist kicking in.3

Pushing harder. With a torque sensor, the more force you apply, the more power the motor delivers.4 With a cadence sensor, the assist is more of a binary system.3 Your effort doesn't change it much.

Gears. For how to ride with your bike's assist system, follow your own bike's manual. The sources here don't give riding instructions, and the manual is the right place for them. It also tells you how your bike's assist levels are meant to be used.

Effort. The same maker adds that a torque sensor asks for quite a bit of rider effort before the assist triggers.4 That is one maker's view. Other sources here describe the lag differently, so compare them.

Not always one or the other

Some e-bike models combine both. In that setup, one sensor flags that the cranks are turning and the other refines the assist.5

Electrek says many mid-drive e-bikes use multiple sensors, and that the plain cadence-versus-torque comparison mainly applies to most hub-motor e-bikes.3 So a bike's motor type can tell you something about its sensors, though it isn't a rule.

Which is better for you

That depends on how you ride, and the sources here don't pick a winner. Makers describe the choice as a matter of riding style.4

If you're shopping, read the spec sheet for the sensor type, and use the manual for your model to learn how it's meant to be used. To find out what's on a bike you already own, see how to tell which sensor your e-bike has.

Reference list

  1. What is the Difference Between Sensor Types on an Electric Bike?, EVELO
  2. How to Fix an E-Bike Pedal Assist Sensor, Upway
  3. Torque sensors vs. cadence sensors for electric bikes, Electrek
  4. All About eBikes: Torque vs. Cadence Sensors, Gazelle
  5. E-Bike Tech: The Difference Between Cadence Sensors And Torque Sensors, InsideEVs