Skip to content

How a Torque Sensor Works

Checked November 20, 2026

A torque sensor measures the force you put on the pedals. Torque is simply twisting force. Push harder and the reading goes up.

What it measures

Torque sensors measure the force you apply to the pedals.1 They care about strength more than pedaling speed. Electrek describes a sensor that gauges the tension in the drivetrain, either at the pedals or along the chain line.1

The drivetrain is the chain, cranks and gears that carry your leg power to the wheel.

How a torque sensor reads effortYou push on the pedalsThe sensor reads the forceThe controller scales the assistThe motor adds matching help
Pedal force becomes a signal that scales the assist.

Where it's fitted

Torque sensors are usually built into the bottom bracket or crank.2 The bottom bracket is the part of the frame the cranks connect to. Electrek's wording also allows for a position along the chain line.1

Where it sits changes how the bike is built, so your manual is the place to confirm the position on your model.

How the measuring works

One maker's guide says a torque sensor uses some form of a strain gauge to work out how much force the rider is applying to the pedal.3 A strain gauge is a small part whose electrical reading changes when it's slightly stretched or squeezed.

Not every design is the same, so "some form of" is the careful reading. The sources I've saved describe the strain gauge as one example. They don't cover every design.

What the motor does with the reading

The motor output increases with the pedal force you apply. When you pedal hard, the motor outputs more power, up to a set limit for the assist level you've chosen.3 InsideEVs describes it as delivering a proportional amount of assistance to what the rider inputs.4

So the assist level sets a ceiling. Your effort decides how much of it you get.

What it feels like

Electrek reports very minimal lag between a rider starting to pedal and the assist kicking in.1 The same article says the bike can feel more natural to people used to ordinary bicycles, because the motor follows effort.1

That doesn't mean it suits everyone. Torque sensors can ask for steady effort, and one maker says the rider must exert quite a bit of effort to trigger the electric assist.5

The other type, which reads pedaling motion only, is set against this one in a side-by-side comparison.

Where you'll read about it

Torque sensors are usually found on more premium e-bikes, according to InsideEVs.4 Check your manual or spec sheet for the exact name your maker uses.

Many mid-drive systems pair a torque sensor with a cadence sensor, and Electrek says some also add an angle sensor to help increase power on hill climbs.1 That's why a bike can list several sensors and still feel like one smooth system.

Looking after it

Upway advises against opening or taking apart the bottom bracket to reach a torque sensor, because the parts are calibrated and not designed for home repair.2 If the assist feels weaker than before, or inconsistent, check your manual or ask a dealer. Some brands offer a reset or recalibration in their app, and some don't.2

Reference list

  1. Torque sensors vs. cadence sensors for electric bikes, Electrek
  2. How to Fix an E-Bike Pedal Assist Sensor, Upway
  3. What is the Difference Between Sensor Types on an Electric Bike?, EVELO
  4. E-Bike Tech: The Difference Between Cadence Sensors And Torque Sensors, InsideEVs
  5. All About eBikes: Torque vs. Cadence Sensors, Gazelle